Shanghai Sunland Industrial Co., Ltd is the top manufacturer of Personal Protect Equipment in China, with 20 years’experience. We are the Chinese government appointed manufacturer for government power,personal protection equipment , medical instruments,construction industry, etc. All the products get the CE, ANSI and related Industry Certificates. All our safety helmets use the top-quality raw material without any recycling material.
High voltage static alarm safety helmet
We provide exclusive customization of the products logo, using advanced printing technology and technology, not suitable for fading, solid and firm, scratch-proof and anti-smashing, and suitable for various scenes such as construction, mining, warehouse, inspection, etc. Our goal is to satisfy your needs. Demand, do your best.
Professional team work and production line which can make nice quality in short time..
The professional team provides 24 * 7 after-sales service for you, which can help you solve any problems
28/9/2017, · Position the shield on your ,helmet, so that the inner edge of the brass frame is about 1/2 to 3/4 of an inch from the outer edge of ,the helmet, dome. Mark the position of each of the two screw holes in the shield by making a dot or "x" on the brim of your hat for each hole before you ,remove, the shield so that you can drill mounting holes.
6/8/2009, · In the below pic, ,the helmet, face is facing up. To ,remove, the chin guard section, pull out the plastic tabs on the rear of ,the helmet,. (They have some serrated teeth on them that catch on the padding to keep it in place, so as you ,remove, these, be sure to keep the pressure towards the shell of ,the helmet, to prevent any tearing of the fabric.)
Remove, the shield from ,the helmet, and inspect for scratches or imperfections that may cause a decrease level of vision clarity. Using only the highest quality of automotive, water-based glass cleaner, gently clean the visor using a microfiber cloth to assure a scratch-free cleaning.
A ,helmet, kit is basically a set of speakers and a microphone that installs into your ,helmet,. Helmets that are outfitted with ,helmet, kits are referred to as "wired". With a wired ,helmet, plugged into an intercom or radio, you're able to speak with other wired helmets without having to stop and ,remove, your ,helmet,.
The United States Department of Transportation, or DOT, has set safety standards that motorcycle ,helmet, manufacturers must adhere to and helmets that meet or exceed these standards are known as "DOT certified" helmets. The additional protection a DOT certified ,helmet, offers can …
Remove, the split-pin/rivet washer from the inside area of ,the helmet,. Repeat steps 2 and 3 until all three pins are ,removed,. Separate the two split-pin/rivet fasteners from the locked horizontal position to a vertical position until both ends are parallel to each other using the pliers.
HJC ,Helmet, Shield ,Installation, Instructions. Here is a list of all the available instruction sheets for the various kinds of HJC replacement shields. These instructions offer step-by-step help in removing and replacing shields.
First place the M1 ,helmet, on a surface right way up and undo the chinstrap if you have one. Stretch ,the helmet, cover over ,the helmet,, ensuring the wings go either side of the chinstrap fittings. Put the scrim band around the cover and over ,the helmet,. Push it down to the base of ,the helmet,.
3/11/2020, · Step 1: Inspect Inner Area of ,Helmet,. Before ,installing the helmet,’s microphone, you need to see the inside of ,the helmet, well. The speakers must be set near to the ear. See the padding well to see the inside of ,the helmet,, or there is enough space inside it. Some helmets have no more space inside it; you have to peel back it’s lining.